Other Layers Speed

Outer Wall Speed

Parameter: outer_wall_speed
Unit: mm/s
Default: 50-60 mm/s
Description: Speed for the outermost perimeter that forms the visible surface. Keep slower for best surface quality.

Parameter: inner_wall_speed
Unit: mm/s
Default: 80-100 mm/s
Description: Speed for inner perimeters. Can be faster since they're not visible and provide structural support.

Parameter: infill_speed
Unit: mm/s
Default: 100-200 mm/s
Description: Speed for internal infill. Can be very fast since it's not visible and has low precision requirements.

Parameter: top_surface_speed
Unit: mm/s
Default: 50-80 mm/s
Description: Speed for the topmost visible surface. Keep moderate for smooth finish.

Parameter: bridge_speed
Unit: mm/s
Default: 25-50 mm/s
Description: Speed for bridging unsupported areas. Moderate speed with high cooling for best results.

Parameter: overhang_speed
Unit: mm/s or %
Description: Speed for printing overhanging sections. Slower speeds with high cooling improve overhang quality.

Parameter: support_speed
Unit: mm/s
Default: 80-150 mm/s
Description: Speed for printing support structures. Can be fast since precision isn't critical.

Parameter: support_interface_speed
Unit: mm/s
Description: Speed for support interface layers. Keep moderate for clean support removal.

Feature	Quality	Balanced	Speed
Outer Wall	40 mm/s	60 mm/s	100+ mm/s
Inner Wall	60 mm/s	100 mm/s	200+ mm/s
Sparse Infill	100 mm/s	150 mm/s	300+ mm/s
Top Surface	40 mm/s	60 mm/s	100 mm/s
Bridge	25 mm/s	35 mm/s	50 mm/s

Tip: Outer wall speed has the biggest impact on surface quality. Keep it slower than inner walls and infill for best results.